PowerEgg: 110/230V power detection and switching

Detects failures of electricity supply (110/230V, single phase). Max. output 8A, controlled with a relay. Connects to any device with digital inputs (DI) and digital outputs (DO).

HTemp-1Wire Rack19

Combined temperature and humidity probe for IT environment. Fits into a 19" or 10" cabinet (1U size).

HTemp-1Wire Box2

Combined temperature and humidity probe for IT environment. Indoor use, wall mount.

Humid-1Wire 1m / 3m / 10m

Humidity probe for IT environment. Designed for installation into a IT cabinet (rack) to a cable bundle.

Temp-1Wire 1m / 3m / 10m

Temperature probe for IT environment. Designed for installation into a IT cabinet (rack) to a cable bundle.

Temp-1Wire-Outdoor 3m

Temperature probe, -30°C to +125°C (-22°F to +257°F), for outdoor use. The probe in a stainless steel tube is safe to use even in pharmaceutical or food industry. ATEX certificate is available.

Temp-1Wire-FLAT 3m

Temperature probe, -30°C to +125°C (-22°F to +257°F), for outdoor use. The probe in a stainless steel tube is safe to use even in pharmaceutical or food industry. Suitable for installation in a refrigerator, the flat cable can be laid under the door seal, no need to drill into the refrigerator.

Temp-485 Box2

Temperature probe for indoor use. Communicates over the RS-485 bus using a simple communication protocol. Designed for Poseidon units.

HTemp-485 Box2

Combined temperature and humidity probe for IT environment. Communicates over the RS-485 bus using a simple communication protocol. Designed for Poseidon units.

Poseidon S-Hub

Hub to connect several RS-485 probes to a Poseidon 1250 or 2250 unit. The bus uses CAT5 cabling and RJ45 jacks.

Spider: RS-485 bus convertor for temp, humid & dry contacts probes

Spider enables connecting four 1-Wire probes (temperature, humidity) or contacts to the RS-485 bus. Up to six Spiders (24 sensors) can be connected to a single Poseidon 2250.

Sens-485-UI

Sensor for measuring voltage and current. Connects to the RS-485 bus, fits on a DIN rail. Sens-UI features two independent inputs (Ch1, Ch2). Each input can be configured to measure current or voltage.

Temp-485-Pt100 "Box"

Very durable, industrial temperature sensor. -20°C to +80°C (-4°F to +176°F), IP68, wall mount. A Pt100/A probe is in the tip of the tube. Communicates over the RS-485 bus using a simple communication protocol. Designed for Poseidon units.

Temp-485-2xPt100 "DIN"

Sensor for measuring temperature using two external Pt100 probes. The external probes can contain Pt100 or Pt1000 (temperature range of -55°C/-67°F to +200°C/+392°F, ±0.15°C). Fits on a DIN rail.

Temp-485-Pt100 “Cable”

Sensor for measuring temperature using an external Pt100 probe (included). The external Pt100 probe comes with a 2m cable. The converter is built into a wall-mountable, IP68 box.

Temp-485-Pt100 "Frost"

Temperature sensor for very low temperatures. The probe in a stainless steel housing measures temperatures from -190°C to +200°C (-310°F to +392°F), accuracy ±0.2°C (Pt100). The RS-485 converter is built into a wall-mountable, IP68 box. Operating temperature is -25°C to +80°C (-13°F to +176°F).

HTemp-485 T3419: RS-485 temperature & humidity probe with display

Industrial temperature and humidity sensor with a LCD display. Designed for indoor or outdoor use. The probe is mounted on a 1m cable. Wall mount, connects to a Poseidon unit over RS-485.

HWg PHTemp-485 T7410: Pressure, temp & humid probe with display

Atmospheric pressure, temperature and humidity sensor with a LCD display. Designed for indoor or outdoor use. Wall mount, connects to a Poseidon unit over RS-485.